지정되지 않은 경우 보이는 문구

PRODUCT

다축센서

홈 > 제품소개 > 다축센서

SRI는 6축 로드셀 또는 로보틱스 & 자동차 및 충돌 테스트 더미에 사용되는 6축 Force/ Torque 센서의 주요 개발자 및 제조 업체입니다. 

제품문의 바로가기

* 자세한 내용은 KTINC로 문의 바랍니다.

M411X Series: 6 Axis Wheel Force/Torque Sensor

제품자료, 메뉴얼 다운로드

M411X series measure the ground reaction force and moments to the wheel. The sensor signals ars amplified through the amplifier module M41130-EB-RING-00. SRI provides service to modify a wheel to accommodate the sensor.


M34XX Series: Stick Shift and Brake Pedal Loadcell

제품자료, 메뉴얼 다운로드

M340X series measure brake pedal force. M341X series measure stick or gear knob forces in X and Y direction.


 

M31XX Series Multi-axis Loadcell for Automotive Testing

제품자료, 메뉴얼 다운로드

M31XX Series are widely used for measurement of load paths in automotive underbody components such as engine mount and suspension mount. The small size plus innovative method provide flexibility and reduce difficulty in tooling design.

210XX & 36XX Series: Special Uniaxial and multi-axis Force/Torque Sensor

제품자료, 메뉴얼 다운로드
SRI has a variety of special uniaxial and multi - axis force/torque sensors. Some of the sensors can be fit directly into ABB robots and the foot of a humanoid robot.

3612X Series: 6Axis Force Plate

제품자료, 메뉴얼 다운로드

There are two version of 6 axis force plates: structually decoupled or matrix decoupled.

2210X Series: Torque Sensor for Robot Joint

제품자료, 메뉴얼 다운로드

2210X Series torque sensor is specifically designed for collaborative robot. The sensor thickness can be down to 7mm with torque of 20Nm to 300Nm, Internal converts the signal to 0-5V with power supply of 5V

35XX Series: Extra Thin Force/Torque Sensor

제품자료, 메뉴얼 다운로드

35XX Series Force/Torque Sensor has a patent-pending flexure that can minimize the sensor thickness to 9.2mm, which is the thinnest 6-axis loadcell commercially available today. The overload capacity of is 300% of Full Scale. Standard part # has IP60 protection. The typical nonlinearity and hysteresis is less than 1% and the crosstalk less than 3%. A 6X6 decoupled matrix is provided in the calibration sheet when deliverd.

39XX Series: Large Capacity 6 Axis Loadcell for General Testing

제품자료, 메뉴얼 다운로드

The capacity of 39XX series ranges for 2700N to 291600N, with a diameter from 60mm to 135mm. The typical nonlinearity and hysteresis is less than 1% and the crosstalk less than 5%. The sensor is structurally decoupled, so that it can be conveniently used for general testing. Standard protection is IP60. 39XX series can be made to IP 68 (10m underwater) by adding "P" to the part number (e.g. M3965P).

38XX Serie: High Precision 6Axis Force/Torque Sensor

제품자료, 메뉴얼 다운로드

38XX Series Force/Torque Sensor has equal force capacity for FX, FY and FZ, based on patent-pending flexure. The overload capacity ranges from 600% and 1000%. Low noise amplifier is embedded into M3815X and M3816X. Standard part #has IP60 protection. By adding "P" to the model # (e.g. M3815BP), the protection is increased to IP65. The typical nonlinearity and hysteresis is less than 0.5% and the crosstalk less than 2%. For "H" version, the nonlinearity is less than 0.2%

43XX Series: 6Axis Force/Torque Sensor for Industrial Robot

제품자료, 메뉴얼 다운로드

43XX Series Force/Torque Sensor is also industrial robot. The overload capacity ranges from 300% to 500% of the capacity. Low noise amplifier is embedded within the sensor to provide high voltage output. IP65 protection is designed for industrial environment. The typical nonlinearity and hysteresis is less than 0.5% and the crosstalk less than 3%.